|
Post by DoubleDeuce on Nov 22, 2002 1:16:13 GMT -5
|
|
|
Post by YG862 on Jan 30, 2003 12:10:38 GMT -5
Anyone know of a mod to enable all band transmit for a Kenwood TS130S? Was wondering if it might be the same as the TS140S. Barry YG862
|
|
|
Post by DoubleDeuce on Jan 30, 2003 14:28:39 GMT -5
Here you go Barry Transmitting on the WARC bands As supplied, The ts-130S/V will receive but not transmit on the three warc bands. For tx enable on all three bands unplug the brown wire j5 on the rf unit. This is the board with the shaft from the band switch running above it. For individual bands D8 for 10 MHz D9 " 18 MHz D10 " 24.5 MHz www.mods.dk/
|
|
|
Post by YG862 on Feb 4, 2003 6:49:00 GMT -5
As always thank you so much. Barry
|
|
|
Post by DoubleDeuce on Feb 4, 2003 10:09:32 GMT -5
Your welcome.
|
|