YG151
YOUNG GUN MEMBER
key up! or Draw
Posts: 6
|
Post by YG151 on Mar 9, 2003 21:01:04 GMT -5
I have purchased a D-104 amplified Desk mic. I was wanting to wire it up to a cobra 148gtl that I am using for a base station. I have a paper that says the white wire is pin 1 shield is pin 2 yellow is n/c blue wire is pin4 red wire is pin 5 and black wire is pin 3 is this correct?
|
|
|
Post by YG897 on Mar 9, 2003 21:21:28 GMT -5
1 = Audio 2 = Ground / Common 3 = Recieve 4 = Switching Wire 5 = Transmit
If black is your receive then it goes on pin 3
|
|
YG151
YOUNG GUN MEMBER
key up! or Draw
Posts: 6
|
Post by YG151 on Mar 9, 2003 21:37:06 GMT -5
That sounds good,I just wanted to be sure before I fired up the iron. I don't mind burning my fingers as much as I would if I burnt up my mic. or radio. [ fingers heal, radios burn deep in my pockets] Thanks! Ron ;D
|
|
|
Post by DoubleDeuce on Mar 9, 2003 23:21:45 GMT -5
|
|